REKLAB
REKLAB Manual Navigation

Common apparatus

Startup sequence
Hydraulic system
Electronic components
Data acquisition
xPC (Experimental control)
EMG monitoring
NLID Tools
Troubleshooting
Materials

Supine apparatus

Assembly procedure
Safety Measures
Components
Servovalve
Actuator
Potentiometer
Pressure Filter
Torque transducer
Boot
Literature

Standing apparatus

Assembly procedure
Components
Angular sensors
Directional Valves
Load cells
Potentiometers
Pressure Filter
Pressure Reducing Valve
Rotary Actuator Assembly Drawing
Rotary Actuators
Servovalves
Torque transducer
Ultrasonic sensor
Controllability
Literature

Computing resources

CVS

Ethics

Consent form
Experimental Protocols

SDS / Inventory

Material List

Thermostatic Valve

This component is one of two temperature controls on the HPU. (The oil temperature thermostat is the second temperature control.)

This component is used for the proportional regulation of cooling water depending on the setting and the sensor temperature.

The valve activation point is set via a graduated scale ranging from 1 to 5, where 1 represents the minimum and 5 the maximum setpoints. The temperature range over the scale is 25 to 65 deg C (77 to 150 deg F). The valve is set to 3 which represents approximately turn-on point of 110 deg F. The sensor is placed inside of the oil reservoir.


Last modified: 2006-08-15 Ross Wagner

BME home